Design Master Wish List
Welcome to the Design Master Wish List, where you can submit your ideas for improvements to the software.
191 results found
-
Populate MCC Information Based upon Equipment
The motor control center schedule includes several fields that could be populated from the information entered into the equipment connection devices. These include:
Disconnect fuse size
Starter NEMA size
Starter type (ie, starter description)However, these fields do not populate automatically when the equipment connection devices are circuited to the motor control center. Is there a way to make the motor control center fields automatically pick this information from the equipment connection devices when they are circuited to a motor control center? Is there a way to override automatically populating the starter information into the motor control center when the…
5 votes -
add medium voltage conductors as an option when sizing conduits.
MV conductor insulation is much larger so you cannot get as many conductors inside a conduit. if you're using design master to calculate your feeder conduits it will be incorrect over 600v. I don't believe this is readily apparent now.
5 votes -
Different layer systems for different loops and tick marks on a circuit
We can assign layers based on one-line (panel) or circuit or devices however not all parts of circuit are on the same layer. I may run some in the slab and some in the walls. Having the ability toi use the manual loop tool to change the layer system would be helpful. Also having the ability to assign a device to multiple layers would be helpful as well.
Or have some of the loops new and some existing.
5 votes -
Breaker Using Twice as Many Spaces
Many breaker panels of old and of new has the ability to put a single, two, or three pole breaker in that takes twice as many spaces as normal. Example is I have a panel I have to represent that has a 2 pole breaker that takes position 36-38 and 40-42. It also has a 3 pole breaker in it that take 24-26,28-30,32-34. I have no way of circuiting the device and still have it on phase A, B, and C.
5 votes -
Selective Coordination
Comply with NEC Article 700 requirements for selective coordination of overcurrent protective devices in the supply side of emergency system.
5 votes -
More options for panel callouts, circuit labels, and homerun callouts
Add the ability to specify a prefix or suffix for panel callouts when inserting them on the drawing. For example, be able to label them NEW PANEL 'LA' rather than simple LA.
Also be able to replace the panel name with a different value in the circuit callout. This feature would be used when the panel name is very long.
Also be able to leave the panel name off entirely and list just the circuit number in the homerun label. This feature would be used when there is only one panel in an area.
5 votes -
Photovoltaic Design
Add features to support PV design, such as inverters, combiners, and a string calculator.
5 votes -
Can make changes in Circuit Description
Change dash to a colon/semicolon to avoid confusion. Specially for a panel/s with two sections and dash is been use:, example panel N4 section 2 and a circuit -> N4-2-2,4,6 vs N4-2:2,4,6.
4 votes -
Blank and Spare circuit differentiation
It would be nice if the 'SPARE' circuit label default could automatically change to something else (such as 'BLANK' or 'SPACE' if a circuit is set to have no breaker. This would look like two default names for unused circuits: one for unused circuits with a breaker and another for unused circuits without a breaker.
4 votes -
A copy function for identical floor plans in multi-level buildings would be a time saving idea to speed up drawing.
So that when I am working on a multilevel building all I would have to do is copy the floor plan from one identical level and placing it on the other matching levels then just rename the panels and circuit names, without duplicating the copied information on the original panels. Breaking its connection with the parent panel and giving a notification to reassign panel names.
4 votes -
Separate column in the feeder schedule for the service grounding electrode conductor.
The service ground does not get installed in the conduit with the service entrance conductors, so why is it shown just like all the other feeders where the equipment grounding conductor is installed with the feeder conductors. If you want the feature to show the GEC size, show it in a different column and show the feeder with no ground listed with the feeder conductors so its clear it is not in the conduit.
4 votes -
Default label locations in blocks
Be able to specify locations for labels in blocks. When the labels are added to the block, they will be placed in the desired locations, rather than in the somewhat random default location they are currently placed in.
4 votes -
Homerun Note
Be able to add a note to a homerun callout.
4 votes -
Homerun from non-circuited devices
We'd like an option to manually homerun from devices that lack a circuit. For example, we frequently connect switched receptacles to relays controlled by occupancy sensors, so we'd like to show our homeruns to start at that relay as opposed to a receptacle. We also currently show lighting homeruns commencing at relays for the same reason.
We'd still like to be able to select devices whose circuits we want to include in the homerun.
4 votes -
Incorporate adjustable trip breakers
Add the ability to specify breakers with electronic trip units (ETUs), aka adjustable trip breakers, in Design Master projects.
The intent of adding this capability would be to allow the user to flag where an ETU is used and display the required/desired settings.
It would NOT be the intent to make DM have the functionality to do the coordination studies necessary to develop the settings.
1) Electronic trip breakers, when used, are usually MCBs or feeder breakers with the following characteristics:
Breaker Frame (AF)
Breaker trip (AT)
Breaker plug size (AP)*Long-time pickup (LTPU)
Long-time delay (LTD)
Short-time pickup (STPU) …4 votes -
Redundant Ground
Add "Redundant Ground" as an option for receptacles. Would add an additional ground wire to the tick marks and add an "RG" or similar label to the receptacle itself.
4 votes -
Add a select similar command for devices similar to AutoCAD and AutoCAD MEPs select similar command
I would like to right click on a device already on the plan, and hit select similar rather than having to open up a separate dialogue to pick a device/LVD/Light Fixture device, and then place it. In other words, I'd like to bypass the select device dialogue altogether whenever possible.
4 votes -
Edit Multiple Types of Devices
Create an "Edit Multiple" command to works on all types of devices. Include only attributes that are common to all types of devices: layer system, elevation.
4 votes -
Aim Lamps Separately for Emergency Fixtures
For fixtures used in the outdoor and egress point-by-point photometrics with two lamps, we need to aim the lamp independently for correct photometrics.
4 votes -
Show conduit runs with schedules
Be able to show conduits feeder runs on their own layer with up and down riser symbols. Then be able to create a conduit schedule.
4 votes
- Don't see your idea?