Design Master Wish List
Welcome to the Design Master Wish List, where you can submit your ideas for improvements to the software.
57 results found
-
Save manual tick mark settings per user, not per project
Save the tick mark settings in the "Insert Tick Mark" command per user, not per project.
Currently the settings are saved per project. If multiple people are using the command in a project, their settings overwrite each other. If a single person goes to different projects, their settings are not remembered.
2 votes -
Panel Edit - AIC Rating to include Size Automatically Option
It would be nice to have Electrical DM Panel Edit to have an option for Fault Current - AIC Rating to include "Size Automatically" option, on top of the standard AIC ratings DM provides in the drop down option.
3 votesThis request wouldn't be hard, but it is one we've specifically avoided to this point. Our thinking is that the AIC rating of a panel is an important enough setting that we want it reviewed and set intentionally by the engineer.
-
Add capability to adjust Target Conduit fill at Panel Level and in options + Warning when exceeded
Sometimes I prefer to over-size conduit for various reasons. However, if this is done manually at the panel level and then the feeder / ampacity changes, its very easy to have a feeder that exceeds 40% fill. Proving an option to adjust the maximum fill from 40% would allow the user to over-size conduits without manually selecting a size.
Also, adding an alert that warns you when a feeder exceeds 40% (Similar to the panel threshold warning) would be a great add.
1 vote -
Change default circuit callout
Add an option for the default circuit callout inserted on the drawing when connecting a device to a panel. Currently it always lists the full circuit callout of panel name and circuit number (P-1).
1 voteThe solution in the current software is to circuit the device then use the “Modify Circuit Label” command to change the callout.
-
I would like to be able to select a circuit number and highlight a device and draw a homerun, i.e. dedicated circuits, equipment, etc.
This would avoid the more cumbersome 2 step process
1. circuit device
2. draw homerunDepending on the job there are can be lots of dedicated circuits and/or pieces of equipment...
1 vote -
Customization of circuiting callouts
In circuiting callouts, allow the dash to be replaced by a custom string.
Example: Default circuiting callout is L1A-1,3,5. Allow us to make it say L1A: 1,3,5 or L1A CKT 1,3,5.
8 votes -
Spaces in Feeder Callouts
Be able to display feeder callouts with spaces after commas, instead of having all the wire sizes right next to each other.
Current Callout:
2''C,2#3/0,#3/0N,#6GDesired Callout:
2''C, 2#3/0, #3/0N, #6G4 votes -
Separate column in the feeder schedule for the service grounding electrode conductor.
The service ground does not get installed in the conduit with the service entrance conductors, so why is it shown just like all the other feeders where the equipment grounding conductor is installed with the feeder conductors. If you want the feature to show the GEC size, show it in a different column and show the feeder with no ground listed with the feeder conductors so its clear it is not in the conduit.
4 votes -
Add a hatch pattern to room definitions
When defining rooms, it is often difficult to determine which rooms have been defined and which have not, if an area gets surrounded. Adding a hatch pattern on its own layer would make it much easier to determine if you've included all room definition areas.
3 votes -
Reset panel "Fixed Loads".
Often, I need to "start over" on a panel that I've assigned fixed loads. It would be handy to have a button that would clear every fixed load on the panel. Or even be able to select several circuits and clear those circuit's fixed loads.
5 votes -
Default label locations in blocks
Be able to specify locations for labels in blocks. When the labels are added to the block, they will be placed in the desired locations, rather than in the somewhat random default location they are currently placed in.
4 votes -
Homerun Note
Be able to add a note to a homerun callout.
5 votes -
Export Light Fixture Watts to Excel
Export the Energy Code Settings->Watts field from the light fixture schedule to Excel using the DM Electrical Excel Add-in.
4 votes -
please add a new column to the lighting fixture schedule for "KELVIN"
ADD NEW COLUMN IN LIGHT FIXTURE SCHEDULE FOR "KELVIN"
2 votes -
Light Fixture Settings - Different Blocks
The ability to define an egress fixture as the same fixture/block as the normal fixtures, with an option to turn a hatch on/off to differentiate. Similar to in Revit, where you can set an instance parameter and check it to turn fixtures into the egress blocks. The fixture type stays the same, only the visible block changes.
16 votes -
Voltage Drop in Equipment Schedule
Add "Voltage Drop" as a column to the equipment schedule. Would list the branch circuit voltage drop to a each piece of equipment in the schedule.
4 votes -
Customizable tick marks
DesignMaster currently supports the following tick marks during an "Insert tick mark" operation:
- Hots
- Neutral
- Ground
- Iso ground
- Switch leg
- Traveller
- Space
We'd like the option to include customizable tick marks in addition to the ones already implemented above. For example, we include tick marks for low voltage cabling used to dim luminaries on our drawings.
I imagine the customization being performed through Design Master Electrical Options under the "Tick Mark Blocks" section. There'd be a "Customized tick mark 1 name" option and another option called "Customized tick mark 1 block". These customized tick marks would then show up in…
2 votes -
Add "Clear Circuit" Button Back to "Circuiting" Dialog Box
Add the "Clear Circuit" command back to the "Circuiting" dialog box. This button will set all the breaker and branch circuit sizing options back to "Size Automatically", set all the fixed loads to "0", and set the circuit descriptions to be blank.
3 votes -
Manufacturer Name field included within Notes Settings of distribution equipment
It would be helpful when creating distribution equipment lists if there was an option for the manufacturer's name. Currently we have to use an unused Note key, rename the label for that key and then remember which Notes Setting corresponds to the list entry.
1 vote -
Print Full Panel Schedules to 8.5x11 Sheets
Print full panel schedules, exactly as shown on the drawing, to a printer using 8.5x11 paper.
One specific use for these panel schedules would be to be submitted to Labor and Industries in Washington state for review.
3 votes
- Don't see your idea?