Design Master Wish List
Welcome to the Design Master Wish List, where you can submit your ideas for improvements to the software.
56 results found
-
Adjust Transformer Taps
Be able to adjust transformer taps to take care of voltage drop.
1 vote -
Ability to add multiple set of conductor in a single conduit
Example:
For 400A feeder:
(2) 3"C, 3-250kcmil AL, 250kcmil AL N, #1 AL G
(1) 4"C, 6-400kcmil AL, 2-400kcmil AL N, #1 AL GInstead of each set take (1) conduit, would be good to get multiple set into a single conduit. This is mainly because installing (1) 4" conduit is cheaper than (2) 3" conduits.
1 vote -
Single Line-to-Ground Faults
Calculate single line-to-ground faults (NEC 230.95).
1 vote -
DC arc flash
Incorporate DC Arc Flash calculations. A lot of design work now has an element of renewable energy devices - solar, wind, etc. And many of those have battery 'peak shaving' capability. Being able to calculate both AC and DC arc flash given the electrical model will provide a one-stop-shop for arc flash. I would not rely so heavily on SKM. Thanks!
2 votes -
Room Names in Circuit Description
Provide an option for Room Names analogous to the "Conduit location" Option. Also consider other customization:
-Custom Room prefix - e.g. RM
-Option to include/exclude Name - e.g., RM 120
-Option to include/exclude Number - e.g., RM FIRE RISERRoom Names Location:
->Start of Circuit Description
->End of Circuit DescriptionCurrently the room names always go at the end, just like OOTB Revit. Having the option to put the room at the start would allow for better scheduling for when the intent is for circuits to be organized by room, like so:
https://i.postimg.cc/qMFD3DLx/2019-01-30-13-12-16-Window.png4 votes -
Be able to create a panel schedule for existing loads not in model
I do a lot of remodel work and it would be nice to be able to fill out a panel schedule with existing load data from a hard copy of an existing panel schedule without have to actually put the loads in the model and then circuiting them.
7 votesI won’t say never, but this feature would be quite difficult currently. We let Revit handle all the loads in the project. It really needs to be handled by Autodesk directly rather than by us.
-
Include "1" before single ground and neutral wires
Add an option to include a "1" in the wire callout before single ground and neutral wires. Currently the wire size is listed with no count before it.
Current wire callout:
1/2"C, 1#12, #12N, #12GNew wire callout:
1/2"C, 1#12, 1#12N, 1#12G4 votes -
ComCheck Export For Revit
I would like to export from Revit to import into ComCheck similar to the AutoCAD version of Design Master Electrical
9 votes -
Be able to add disconnects to equipment so they work similar to Design Master Electrical in AutoCAD
We need a way to link two family instances together so that when you update one of the instances it updates the other.
5 votes -
Ability to measure wire
I am a design build Engineer/Contractor and would like to be able to get takeoff data.
3 votes -
Outdoor point-by-point calculations
Add outdoor point-by-point calculations for parking lot lighting.
11 votes -
Indoor point-by-point calculations
Add indoor point-by-point lighting calculations.
8 votes -
Specify fault at upstream device
Be able to specify the fault at the upstream device, rather than at the current device. This feature would be useful when you want to specify the fault at the utility transformer but it is not included in the Revit model.
3 votes -
Swap circuits in Revit
Be able to swap circuits in Revit like you can using the "Move Circuit" command in DM Electrical for AutoCAD.
8 votes -
Add "Panel Neutral" in Revit MEP
Add "Panel Neutral" as a parameter to panels in Revit MEP.
Options for neutral would be:
50%
100%
133%
200%
NoneThis value would be a shared parameter for scheduling purposes. It would not be used in any calculations.
2 votes -
Prompt to Load DM
Add a prompt before loading any DM information into a project. Would be useful when you do NOT want DM loaded in a specific Revit project.
At the project level, would save your response so that you are only prompted once.
At the user level, would have an option to disable the prompt so DM is automatically loaded in all projects like it currently is for customers who prefer that workflow.
0 votes
- Don't see your idea?