Design Master Wish List
Welcome to the Design Master Wish List, where you can submit your ideas for improvements to the software.
357 results found
-
Light Fixture Settings - Different Blocks
The ability to define an egress fixture as the same fixture/block as the normal fixtures, with an option to turn a hatch on/off to differentiate. Similar to in Revit, where you can set an instance parameter and check it to turn fixtures into the egress blocks. The fixture type stays the same, only the visible block changes.
16 votes -
Background Mask for Text
Have a mask on all the text inserted with Design Master that will hide anything on the drawing behind it to make it easier to read.
16 votes -
Export to eQuest or DOE2.2
Be able to export building load information to eQuest or DOE2.2 using gbXML for energy modeling purposes, such as ASHRAE 90.1, LEED, and Title 24.
15 votes -
Upsize wire of branch circuits based on voltage drop
have the branch circuits upsize wire based on the voltage drop or have a setting similar to what we have in AutoCAD.
14 votes -
Improve combined homeruns
Be able to combine homeruns with different wire sizes.
Be able to combine homeruns from separate panels.
Be able to display a full wire callout for combined circuit homeruns, including calculating the conduit size required for all the wires.
14 votes -
Export schedules to excel
My estimators are always asking me if they can get my fixture or panel schedules in an excel format.
13 votes -
Multiple Switch Legs on a Single Switch
Allow a single switch to have multiple switch legs associated with it. Currently we require a separate switch for each switch leg.
13 votes -
13 votes
-
Create Separate One-Lines for Each LVD Group
I have Security, F/A, Lighting Control Panels, Audio, and Data groups and would like to be able to create separate low voltage one-line risers for them.
13 votes -
Allow diffuser tags to be moved and modified with standard AutoCAD editing commands.
It would be helpful to not have to use the "special" DM commands to manipulate the diffuser tags.
13 votes -
Color code room outlines by wall type.
So for example when modifying walls during a load calc. Exterior walls might be red, partitions blue, and interior walls (no heat transfer) green. This could even be expanded to visually shows with color walls that have windows or doors.
There have been many times when I've had to back check walls that were inadvertently called out as partitions instead of exterior. Color coding would give an instant visual clue where mistakes might have been made.
12 votes -
New and Existing Circuits / Breakers in Panel Schedule
Be able to show new and existing circuits on different layers in a panel schedule. The existing circuits would be on a lighter layer and the new circuits would be on a darker layer. The rest of the schedule could be on either the new or existing layer.
12 votes -
Premade fixture blocks
Premade blocks similar to what is used in both HVAC and Electrical could be inserted into the drawing with predefined fixture units. The fixture units would be stored into multiple headings with IPC and UPC fixture units. The connections would be there with predetermined heights as well.
12 votes -
Add Sections to Panels
Define how many breakers are in each section of panel. This would be used when creating a 84 circuit panel that is made up of 2 sections, each with 42 circuits.
For the panel schedule, include a separator between the sections.
When circuiting, do not allow 2 or 3 pole circuits to span the two sections.
12 votes -
SKM Power Tools
Provide the ability to import and export panel schedules and switchboard schedules between Design Master and SKM PowerTools for Windows.
12 votes -
Outdoor point-by-point calculations
Add outdoor point-by-point calculations for parking lot lighting.
11 votes -
Set number of spare breakers
Add an option to require a set number of spare breakers on every panel. The other breakers in the panel would be listed as spaces.
11 votes -
Highlight Duct Sizes That Changed After Resizing Ductwork
For large sprawling duct systems it is difficult to monitor all the duct sizes that change. When you calculate and redraw a single branch, all the ducts are erased and redrawn. This makes it difficult to know which duct sizes changed and which stayed the same.
11 votes -
Object Enabler for Navisworks
Create an object enabler for Navisworks to allow the 3D ductwork, pipes, conduit, and cable tray to be viewed directly from the DWG without requiring it to be exported to an IFC file.
11 votes -
Select automatic conduit based on Type
When selecting conduit I want to be able to select the feeder as schedule 80 so that the only size option would be based on schedule 80. Then on another feeder I could select EMT for my circuits and the only option for auto sizing would be based on EMT. Finally, I would then have the option of adding the type to my one-lines and a conduit schedule.
11 votes
- Don't see your idea?